SSS Siedle SET CV 850-1 Produktinformation Seite 24

Programming - manual
Programming door calls
Application
Call from the door station to a bus
telephone.
At the bus telephone, a different
ring tone optionally be selected.
The volume of the door call can be
changed at the bus telephone.
1 Switch on the programming mode.
At the VSNG 850-..., press the pro-
gramming mode button briefl y. The
LED1 fl ashes in a 2-second rhythm
to indicate that the programming
mode is active.
4 Hold down the light button for 4
seconds. A protracted acknowledge-
ment tone sounds in the receiver,
the muting button fl ashes. A speech
connection exists to the door
station. The bus telephone is now in
the programming mode. Leave the
receiver off the hook.
2 At the door station, hold down the
programming button for 4 seconds.
A protracted acknowledgement tone
is then audible which is repeated
every 5 seconds as long as the
programming mode remains active.
5 At the door station, hold down the
required call button for 4 seconds
until a protracted tone sounds at the
door loudspeaker. The call button is
now assigned to the bus telephone,
no speech connection now exists.
3 Lift the receiver at the bus tele-
phone which you wish to program.
6 Replace the receiver at the bus
telephone. The call button is now
fi rmly assigned to the bus telephone.
19