Prozentwägen (Code 2, 1. 5)
Zweck
Mit diesem Anwendungsprogramm kann der prozentuale Anteil eines Wägegutes
bezogen auf ein Referenzgewicht ermittelt werden.
Merkmale
– Übernahme des aktuellen Wägewertes als eingestellte Prozentzahl für die
Initalisierung beim Start des Programms »Prozentwägen«
– Ändern der Referenzprozentzahl im Menü möglich: siehe Kapitel
»Voreinstellungen«
– Automatische Ausgabe des Referenzgewichtes über die optionale
Datenschnittstelle nach Abschluß der Initialisierung, wenn Ausdruck mit
Kennzeichnung im Menü eingestellt ist
– Umschalten zwischen Prozentzahlanzeige und Gewichtswertanzeige
mit Taste [FUNCTION]
Werksvoreinstellungen der Parameter
Referenzprozentzahl: 10 (Code 3. 3. 2)
Vorbereitung
§ Anwendungsprogramm »Prozentwägen«
im Menü einstellen: siehe »Voreinstellungen«
Code 2. 1. 5
Prozentwägen
§ Referenzprozentzahl:
Code 3. 3. 1
5 %
Code 3. 3. 2
10 %
Code 3. 3. 3
20 %
Code 3. 3. 4
50 %
Code 3. 3. 5
100 %
siehe auch Kapitel »Voreinstellungen«
Weighing in Percent (Code 2, 1. 5)
Purpose
This application program allows you to obtain weight readouts in percent which
are in proportion to a reference weight.
Available Features
– Store the current weight value to have it loaded as the preset reference
percentage next time you initialize the Weighing in Percent application
– The reference percentage can be changed in the operating menu: See
"Configuring the Balance"
– The reference percentage is automatically output via the optional data interface
port after initialization, if the menu code for "Printout with data ID codes"
is set
– Press [FUNCTION] to toggle the display between percentage and weight
Factory Settings
Reference percentage: 10 (menu code 3. 3. 2)
Preparation
§ Configure the Weighing in percent application in the operating menu: See
"Configuring the Balance"
Menu code 2. 1. 5
Weighing in percent
§ Reference percentage:
Menu code 3. 3. 1
5 %
Menu code 3. 3. 2
10 %
Menu code 3. 3. 3
20 %
Menu code 3. 3. 4
50 %
Menu code 3. 3. 5
100 %
See also "Configuring the Balance"
17