Operation With Mac - Medisana Smart Baby Monitor Gebrauchsanweisung

Downloading the software:
To discover the Smart Baby Monitor in your network download the latest version of
the free software for PC from the software section of our homepage.
(http://www.medisana.com/sbm)
1. Click "Search (F3)" (1) and click on the found device in the list (2).
2. The IP address (3) should be given automatically by DHCP and should be the same
as under "Local PC information", except the circled area above. If this is not the
case, proceed with step 3, otherwise with step 4.
3. Enter the authentication information (4). The factory default setting for "Account for
watching" is "admin" and for "Password for watching" it is "medisana". Click "Update
(F5)" (5).
4. Now click "Browse (F4)" (6). The below shown pop-up window will appear. Enter your
user name (default: "admin") and password (default: "medisana") to access the
network camera.
2
select
1
Example display after click on a found
device (point 1 below)
admin
medisana
5 Operation with PC
3
admin
******
6
Factory default
settings
GB
G
G
4
5
G
G
G
13
GB