Renkforce A-1000 Bedienungsanleitung Seite 36

(3) Infra-red receiver REMOTE SENSOR
This sensor receives the infra-red signals from the remote control. Direct the remote control towards this
sensor during use.
(4) PRESET EQ button
Press this button repeatedly in order to select the following sound settings: Pop (green), Rock (red), Classic
(orange) and FLAT (no colour).
(5) VOLUME control
Using this control, you can set the volume.

Whilst volume is changed, the indicator FUNCTION (2) indicates the volume level. After a short period,
the indicator returns to show the chosen audio input.
(6) EXTERNAL PROCESSOR button
Press this button in order to incorporate any equalizer or signal processor connected to the EQ sockets into
the signal path.
(7) MIC LEVEL control
This control allows you to set the volume for the microphone connected to the MIC (8) connected.
(8) MIC socket
A dynamic microphone can be connected to this input.
(9) PHONO button
This button is for the selection on the phono input.
(10) CD button
This button is for the selection on the CD input.
(11) AV1/AV2 button
This button is for the selection on the AV1/AV2 input.

Both inputs, AV1 and AV2 can be selected by repeatedly pressing the AV1/AV2 (11) button.
1xPress > AV1 selected > indicator FUNCTION (2) lights up green.
2xPress > AV2 selected > indicator FUNCTION (2) lights up red.
36
Operating Instructions

English