Safety Instructions; Symbol Explanation; Maintenance And Disposal - Conrad Electronic 67 13 01 Bedienungsanleitung

Safety instructions

With damages caused by not observing these opera-
ting instructions, the warranty will become void! We
will not assume any liability for subsequent damages!
We will not assume any liability for damages to prop-
erty or persons caused by improper handling or non-
compliance with the safety instructions! Any warran-
ty claim will become null and void in such cases.
For reasons of safety and licensing (CE), it is not allowed to convert
of modify the product.
Please contact a specialist if you have any doubts about the mode
of operation, safety or connection of the device.
Do not leave the packaging material lying around. Plastic wrap-
ping/bags, polystyrene parts etc. are dangerous toys in the hands of
children.
The device does not belong in the hands of children. It is not a toy.
In commercial institutions, make sure you observe the accident pre-
vention regulations of the commercial trade organization for electric
installations.
If you are not certain how to connect the device correctly or in
case of any questions not covered by the operating manual,
please contact our technical support or another specialist.
Please also observe the safety instructions in the individual chapters
of this manual.
28

Symbol explanation

alarm 1 degrees Celsius
alarm 2 degrees Fahrenheit
SNOOZE summer time

Maintenance and disposal

Maintenance
Regularly inspect the mechanical safety of your projection radio-
controlled clock, e.g. for damage to the power cable or housing.
If it has been ascertained that safe operation is no longer possible,
take the device out of operation and secure it against accidental reac-
tivation. Pull the power plug from the outlet and remove the batteries!
It can be assumed safe operation is no longer possible if:
• the power supply or cables show visible damage
• the power supply no long works
• after longer storage under unfavourable conditions
• after heavy transport stresses
Before cleaning or maintaining the projection radio-controlled
clock, observe the following safety instructions:
When opening the covers or removing parts of the
casing, you may expose live parts.
Therefore you have to disconnect the device from all
voltage sources and connections prior to performing
maintenance or repair work.
good radio signal
poor radio signal
second time zone
41