Operating Elements And Connections; Safety Notes - IMG STAGE LINE MFX-16M Bedienungsanleitung

All operating elements and connections de -
GB
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1 Control INPUT LEVEL to match the input level
2 Overload LED CLIP; if the LED lights up, turn
back the control INPUT LEVEL (1) accordingly
3 Control MIX for the effect intensity:
In the position DIRECT, only the original direct
signal will be audible.
In the position EFFECT, only the effect signal
will be audible.
In the intermediate positions, both signals will
be mixed.
4 Control OUTPUT LEVEL to adjust the output
level
5 Control FX VARIATION to adjust various effect
parameters (
6 Button TAP/ F1 to switch the control FX VARIA-
TION to the setting of a second effect parame-
ter for certain effects (
chapter 5)
For the effect DELAY, press the button repeat-
edly to define the delay time; the interval
between the last two actuations will define the
delay time (1.3 sec. max.)
7 Selector switch EFFECT SELECT to select an
effect
8 Button BYPASS / F2
1. To activate / deactivate the effect signal; when
the effect signal has been deactivated, only
the original signal adjusted with the control
MIX (3) will be sent to the outputs
2. For the effect ROTARY, press the button to
stop and restart the simulated rotation of a
speaker.
3. For the effect DELAY/ REV, press the button
and the button TAP/ F1 (6) to switch the con-
trol FX VARIATION (5) to the setting of a third
and fourth parameter (
9 Power LED
10 POWER switch
11 Jack to connect the power supply unit provided
12 Signal outputs (6.3 mm jack, unbal.) to connect
the inputs of the subsequent audio unit
13 6.3 mm jack FOOTSWITCH to connect a
footswitch for remote control of the function of
the button BYPASS / F2 (8)
14 Mono signal input (6.3 mm jack, unbal.) to con-
nect a signal source (audio unit with line output)
8
table on page 3)
table on page 3 and
chapter 6.5).

2 Safety Notes

The units (effect unit and power supply unit) corre-
spond to all relevant directives of the EU and are
therefore marked with
WARNING
The power supply unit uses danger-
ous mains voltage. Leave servicing
to skilled personnel only. Inexpert
handling may result in electric shock.
Please observe the following items in any case:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water,
high air humidity and heat (admissible ambient
temperature range 0 – 40 °C).
G
Disconnect the power supply unit from the socket
immediately
1. if one of the units is visibly damaged,
2. if a defect might have occurred after a unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the units must be repaired by skilled
personnel.
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the units and no liability
for any resulting personal damage or material
damage will be accepted if the units are used for
other purposes than originally intended, if they
are not correctly connected or operated, or if they
are not repaired in an expert way.
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which will not be harm-
ful to the environment.
3 Applications
The MFX-16M is a digital effect unit with 16 differ-
ent effects, e. g. Delay, Reverb, Gated Reverb,
Chorus, Flanger, etc. and various effect combina-
tions. In an audio system, the effect unit is used to
modify the sound. It is inserted in the signal path,
e. g. in the effect way of a mixer. Due to its compact
design, the MFX-16M is suited for versatile appli-
cations.
4 Connections
Prior to making or changing any connections,
switch off the effect unit and the units to be con-
nected.
1) Connect the line output of a mono signal source
(e. g. effect send output of a mixer, output of a
musical instrument or of a microphone pream-
plifier) to the jack INPUT (14).
.