Inhaltsverzeichnis
Werbung
For information about HP Mobile Broadband and how to activate service with a preferred mobile network
operator, see the HP Mobile Broadband information included with your computer.
Using HP Mobile Connect Pro (select products only)
HP Mobile Connect Pro is a prepaid, mobile broadband service that provides a cost-effective, secure, simple,
and flexible mobile broadband connection for your computer. To use HP Mobile Connect Pro, your computer
must have a SIM card and the HP Mobile Connect app. For more information about HP Mobile Connect Pro and
where it is available, go to http://www.hp.com/go/mobileconnect.
Using GPS (select products only)
Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location,
speed, and direction information to GPS-equipped systems.
To enable GPS, make sure location is enabled under the Windows privacy setting.
1.
Type location in the taskbar search box, and then select Location privacy settings.
2.
Follow the on-screen instructions for using location settings.
For more information, see the Get started app.
To access the Get started app:
Select the Start button, and then select the Get started app.
▲
Using Bluetooth wireless devices (select products only)
A Bluetooth device provides short-range wireless communications that replace the physical cable connections
that traditionally link electronic devices such as the following:
Computers (desktop, notebook)
●
Phones (cellular, cordless, smartphone)
●
Imaging devices (printer, camera)
●
Audio devices (headset, speakers)
●
Mouse
●
External keyboard
●
Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For
information about configuring and using Bluetooth devices, see the Getting Started App.
Select the Start button, and then select the Get started app.
▲
Connecting Bluetooth devices
Before you can use a Bluetooth device, you must establish a Bluetooth connection.
1.
Type bluetooth in the taskbar search box, and then select Bluetooth settings.
2.
Turn on Bluetooth, if it is not already turned on.
3.
Select your device from the list, and then follow the on-screen instructions.
NOTE:
If the device requires verification, a pairing code is displayed. On the device you are adding, follow the
on-screen instructions to verify that the code on your device matches the pairing code. For more information,
refer to the documentation provided with the device.
30
Chapter 4 Network connections
Werbung
Inhaltsverzeichnis
