Saving The Chain Setting (Write) - Korg Beatlab BTL-1 Bedienungsanleitung

program using the
meric keys.
(4) Press the INS key.
The program is inserted into the selected bar,
causing the programs preset in the subse-
quent bars to shift backward.
On the LC display, the selected program num-
ber disappears once and appears again at
once.
Note: No program can be inserted when all
of bars 1 to 16 have programs. In this
case, "FULL" blinks twice on the LC
display.
(5) Now the bar is ready for program insertion.
Enter the program number you want to in-
sert.
"EDIT" appears on the LC display when the
setting is changed.
16
and keys or the nu- Inserting program in bar 4
BAR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PROG 1 2 3 4 5 6
↓ Inserting in bar 4
BAR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PROG 1 2 3 4 4 5 6 --
↓ Inserting program 2 in bar 4
BAR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PROG 1 2 3 2 4 5 6 --

Saving the chain setting (WRITE)

You can save the chain setting in the BEATLAB
memory. Selecting any other chain before sav-
ing the setting of the current chain causes it to
return to the previous setting, not to be saved.
Be sure to save your important chains in the
memory by carrying out the writing operation.
(1) Press the WRITE key after setting the pa-
rameters of a chain.
The BEATLAB goes to the chain selection
--