Technical Specifications - Trust SECURITY PLUS-LINE ALMDT-2000 Bedienungsanleitung

ALMDT-2000 INFRARED MOTION SENSOR
EN
Read these simple instructions. Failure to follow these instructions can be dangerous.
Incorrect installation will void any warranty on this product.
COMPATIBILITY
The sensor works with the
ALSIR-2000.
SMARTPHONE/TABLET FUNCTIONS
By combining this product with the OCTOPUS Control station, you can also set your alarm on / off via your tablet and / or
smartphone and receive push notifications when you are not at home.
For more information visit trust.com/71110

TECHNICAL SPECIFICATIONS

• Battery
• Battery life
• Battery low indication
• Frequency
• RF Range
• Detection range
• Detection angle
WIRELESS SIGNAL
• The 868 MHz signal passes through walls, windows and doors.
• Range up to 120 m (under optimal conditions).
• The range depends on local conditions, such as the presence of metals. The metal particles in for example, double
glazing (HR glass), can provide a reduction in the range of wireless signals.
• There may be restrictions on the use of this device outside the EU. Check, if applicable, whether this device meets local
regulations.
Legal information
CE: Trust declares this device complies with the Directives as listed in Section 2 of this document.
WEEE: Dispose of the device at a recycling centre. More information: www.trust.com
Warranty information: www.trust.com/warranty
1
FUNCTIONALITY
Infrared motion sensor for triggering the ALSIR-2000.
2x 1,5V AA alkaline battery (not included)
18 months stand-by
LED will blink 3 times every 6 sec
868 MHz 2-way communication
Up to 120 m (under optimal conditions)
± 15 m
Max. 120⁰ horizontal and Max. 62⁰ vertical