English - Kenwood HM670 Serie Bedienungsanleitung

before using your Kenwood
appliance
Read these instructions carefully and
G
retain for future reference.
Remove all packaging and any
G
labels.
safety
Ensure the cord is fully unwound
G
from the cord wrap before using the
handmixer.
Never put the handmixer body in
G
water or let the cord or plug get wet.
Keep fingers, hair, clothing and
G
utensils away from moving parts.
Never let the cord touch hot
G
surfaces or hang down where a child
could grab it.
Never use a damaged handmixer.
G
Get it checked or repaired: see
'service and customer care'.
Never use an unauthorised
G
attachment.
Always unplug the appliance when
G
not in use, before fitting or removing
parts or before cleaning.
This appliance is not intended for
G
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
G
ensure that they do not play with the
appliance.
Only use the appliance for its
G
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.

English

before plugging in
Make sure your electricity supply is
G
the same as the one shown on the
rear of your handmixer.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using your handmixer
for the first time
Wash the parts (see 'cleaning').
G
key
speed switch
tool release button
mixer
beaters
kneaders
spatula
splash guard
mixing bowl
mixer release switch
cord wrap
cradle release switch
cradle
stand
to use your handmixer
Unwrap the cord from the cord wrap
G
before use.
1 Insert the mixer into the cradle and
push down to locate
To remove, press the mixer release
G
switch
of the cradle.
2 Push down the cradle release switch
and swing the mixer upwards on
the stand
3 Place the ingredients into the mixing
bowl and then place the bowl on to
the stand.
4 Insert the beaters or kneaders into
the mixer – turn until a positive click
is felt
If using the mixer with stand, insert
G
the beater/kneader with the plastic
gear ensuring it aligns with the drive
gear on the cradle.
2
.
whilst lifting the mixer out
.
.