Service; Operation; Switching On And Off; Setting The Stroke Depth - Parkside PGG 15 C2 Originalbetriebsanleitung

5. Service

a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.

Operation

Never use the appliance for other purposes and only original parts/
accessories. Using attachments or accessory tools other than those
recommended in the operating instructions can lead to a risk of injury.
Switching on and off
♦ Insert the power plug into a mains wall socket.
Switching on:
♦ Press the ON/OFF switch
Switching off:
♦ Let go of the ON/OFF switch

Setting the stroke depth

You can use the stroke rate control
engraving. A low setting is usually sufficient for the most common
applications.
♦ Turn the stroke rate control
stroke depth.
♦ Turn the stroke rate control
stroke depth.
NOTE
► When you increase the stroke depth, make sure not to turn the
stroke rate control
Otherwise, you will unscrew the control off the appliance.
PGG 15 C2
.
.
to adjust the depth of the
towards the + to increase the
towards the – to decrease the
too far in the direction of the +.
│
GB 45 ■