PICO PicoScope 3204 Handbuch Seite 17

Arguments
Returns
Code Enumeration
0
1
2
3
4
5
6
7
8
9
10
11
5.2.6
ps3000_get_timebase
short ps3000_get_timebase ( short handle,
This function discovers which timebases are available on the oscilloscope. This function should be
called after channel and ETS options have been set.
Copyright 2005 Pico Technology Limited. All rights reserved.
handle, the handle to the required device.
channel, an enumerated type, use PS3000_CHANNEL_A (0),
PS3000_CHANNEL_B (1), PS3000_CHANNEL_C (2) or PS3000_CHANNEL_D
(3). Channels C and D are not available on all models.
enabled, specify if the channel is active: TRUE=active, FALSE=inactive.
dc, specifies the position of the AC/DC switch: TRUE=DC, FALSE=AC.
range, a code between 0 and 12 see the table below.
if unsuccessful, or if one or more of the arguments are out of range.
0
if successful.
1
Range
PS3000_10MV ±10mV
PS3000_20MV ±20mV
PS3000_50MV
±50mV
PS3000_100MV
±100mV
PS3000_200MV ±200mV
PS3000_500MV ±500mV
PS3000_1V ±1V
PS3000_2V
±2V
PS3000_5V
±5V
PS3000_10V ±10V
PS3000_20V ±20V
PS3000_50V ±50V
Not available on all models.
Not available on all models..
Not available on all models.
Not available on all units.
short timebase,
long no_of_samples,
long * time_interval_ns,
short * time_units,
short oversample,
long * max_samples)
Technical reference
16