GB │ IE
■
Remove the protective film from the self-adhesive
strips and affix the alarm device
the window or door.
Attach the magnets
door panel, parallel to the alarm device
The alignment mark
housing
must be pointing directly at the alignment
marking
For thicker door panels or window casements, position
the magnet
casement (see Fig. C).
NOTE
►
When the door or window is closed, the distance
between the alarm device
must not be greater than 10 mm!
Activate/deactivate alarm function
♦
Push the On/Off switch
The alarm function is now activated and the alarm
will sound if the door or window is opened.
♦
Move the On/Off switch
to deactivate the alarm.
Cleaning/storage
CAUTION
►
To avoid irreparable damage, ensure that no
moisture penetrates the appliance during
cleaning.
♦
Clean the appliance with a soft, dry cloth.
♦
If you decide not to use the appliance for a long
period, remove the batteries and store it in a clean,
dry place away from direct sunlight.
Disposal
The adjacent symbol of a crossed-out wheelie
bin means that this appliance is subject to
Directive 2012/19/EU. This directive states
that this appliance may not be disposed of in normal
household waste at the end of its usable life, but must
be handed over to specially set-up collection locations,
recycling depots or disposal companies.
This disposal is free of charge for the user.
Protect the environment and dispose of
this appliance properly.
You can obtain further information from your local
disposal company or the city or local authority.
Disposing of the batteries
Batteries should not be disposed of in the
house hold waste. Consumers are legally obliged
to dispose of used batteries at a collection point
in their town/district or at a retail store.
This obligation is intended to ensure that batteries
are disposed of in an environmentally responsible
manner. Dispose of batteries only when they are fully
discharged.
to the window casement or
on the side of the magnet
on the alarm device
on the side of the door panel or window
to the frame of
(see Fig. A).
and the magnet
to the "ON" position.
to the "OFF" position
4
(see Fig. B).