Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROBLEM
E1
E2
E3
E4
E5
---
By using the treadmill, typical and rhythmical sounds can appear. This is no error and will disappear
after about 10 – 15 hours of using.
If there are any problems, remove the batteries (if there are batteries) and the power adapter for few
seconds. If the problem continues, please contact our service departure.
If you have any further questions, do not hesitate to contact us!
PROBLEMS
CAUSE
Communication error
Indicates that the controller
has not detected the voltage
above the motor
No speed sensor signal
Rising self-learning failure
Overcurrent protection
Security magnet key
Check the cable connections
Check if the connection of the motor cable is
secure.
1. Restart the treadmill
2. Please check, if the controller starts to smell.
If yes, replace the controller.
Check the cable connetions to the motor and replug
them.
Restart the treadmill.
Check the security magnet key.
41
SOLUTION
Werbung
Inhaltsverzeichnis
