Mp3 / Wma Cd; Aux-In Mode; Sleep (Timer); Alarm - Albrecht Audio DR 890 CD Bedienungsanleitung

8.4. MP3 / WMA CD

DR 890 CD is able to play CD-R and CD-RW discs containing MP3 and WMA files. It is assumed in
this section that a file is equivalent to a CD track.
Playback controls are the same as „8.1. Playback", "8.2. Repeat/Shuffle" and „8.3. CD track pro-
gramming". In addition, DR 890 CD allows to skip folders by pressing FOLDER UP or FOLDER
DOWN on the remote control. The first file of the next or previous folder will be played and you can
EN
also display additional Information by pressing INFO.
A MP3 / WMA CD may not contain more than 512 files and not more than 99 folders. MP3 and WMA
files should be created with an audio sample rate of 44.1kHz (this is normal for files created from
CD audio content).
MP3 and WMA data rates up to 320 KBit per second are supported. WMA Lossless files are not
supported. The unit will not play files which include digital rights management (DRM) protection.
When burning CD-R and CD-RW discs with audio files, various problems may arise which could
lead to problems with playback. Typically such problems are caused by poor CD writing or audio en-
coding software, or by the hardware settings of the PC's CD writer, or by the CD being used. Should
such problems arise, contact the customer services of your CD writer or software manufacturer or
look in their product documentation for relevant information. When you are making audio CDs, take
care to observe all legal guidelines and ensure that the copyright of third parties is not infringed.

9. Aux-In Mode

Aux-In mode plays audio from an external source such as an MP3 player. To use the Aux-In mode:
• Turn the volume low on both DR 890 CD and, if adjustable, the audio source device.
• Connect the external audio source to the Aux-In 3.5mm stereo socket on the frontside.
• Press
• Adjust the volume of DR 890 CD (and, if necessary, the audio source device) as required.

10. Sleep (Timer)

The Sleep Timer will switch the DR 890 CD into Standby mode after the selected time 15/ 30/ 45/
60 minutes runs out. To set the Sleep Timer press and hold MENU, move to Main menu, select
Sleep and set the time. Once the time is set, there will be a moon icon with the remaining time at
the left bottom of the display.

11. Alarm

There are two independent wake-up alarms with snooze functionality. Each alarm can be set to start
in a particular mode.
46
, then move to Aux-In and press OK.
Auxiliary input
Audio In
Today's Date:
23/08/2013
03:28
English