Rhythm & Bass Reverb Level; Rhythm & Bass Level; Chain Pattern Settings - Korg PANDORA PX4A Bedienungsanleitung

progression. When the bass note is on, you can
use the Value dial to set the key in a range of
C, C ...A , B, allowing you to practice your gui-
tar in a scale that matches that key.
If "METRONM" – "METRO7"(metronome) is se-
lected as the rhythm pattern, there will be no
bass notes, and this screen will not appear.
When using Chain Patterns, the Bass Key set-
ting will be ignored.
4. Rhythm & Bass Reverb Level
Use the Value dial to set the amount of Reverb
for the Rhythm & Bass.
This uses the same reverb as the program ef-
fect. This parameter has no effect if you have
selected a program that does not use reverb
modeling, or if the reverb effect level is "0."
5. Rhythm & Bass Level
Use the Value dial to set the level of the Rhythm
& Bass sound. The bass note will be affected
only if Bass is turned on.

6. Chain Pattern settings

These parameters are added only if you select
"CHAIN" as the rhythm pattern. Press the EN-
TER/REC button to access the Chain Parame-
ter Select screen.
Use the √/® buttons to select the location
(1...16) for which you want to change the pat-
tern, and use the Value dial to select the pat-
Reverb level
tern (p.38) that will be used at that location. Use
the ▲/▼ buttons to specify the bass key of the
selected pattern.
Rhythm & Bass
level
19