MUND CLIMA K-380EW Benutzerhandbuch Seite 9

Q: Cannot configure or no response during the configuration?
A: Please check if the Wi-Fi router can access the network. Please place the remote control into the power supply base; the remote control can
be only used as a universal remote control if it is not placed into the power supply base; Wi-Fi remote control function is available only after
the remote control is placed into the power supply base.
Q: Cannot configure?
A: Please check the router Wi-Fi signal strength and if network speed is normal, then try to reconfigure. Please place the remote control into the
power supply base, and check if the remote control screen displays Wi-Fi icon (
Q: Cannot control the A/C with remote control after successful configuration?
A: Please set the code on the remote control again. Confirm that the remote control can control the A/C and that the code displayed in the
remote control matches with that displayed in the APP . After successful configuration, please first confirm that the code on the remote control
screen matches the present code displayed in the remote control APP , and then use the APP's remote control function (about 3-5s delay,
depending on network conditions). Otherwise, you may need to set the remote control again;
Q: The APP displays device offline?
A: Please place the remote control into the power supply base, and check if the remote control screen displays Wi-Fi icon (
Please check if the Wi-Fi router to which the remote control is connected to, can access the network.
Q: How can you know if the remote control is successfully connected to Wi-Fi?
A: The APP will display device online and the Wi-Fi icon (
control successfully connects to the Wi-Fi router. Wi-Fi function will be automatically disabled (Wi-Fi icon on remote control screen will
disappear) when the remote control is disconnected from the power supply base. Wi-Fi function will be automatically enabled (Wi-Fi icon on
remote control screen will appear) when the remote control is connected to the power supply base.
Tips:
· After replacing the router or restoring the router to factory settings, you must reconfigure the device by following the Add device step
on the APP .
· 1-3s delay during remote control operation by mobile phone is normal. If there is a prolonged delay or there is no response, please test if the
Wi-Fi network connection speed of the mobile phone and router are normal.
· You must point the remote control towards the A/C receiver window.
· Please do not disassemble the remote control by yourself or throw it in fire as it has an inbuilt lithium battery.
· Please keep the remote control away from heat and fire, and please do not let children use the charger without adult supervision, as there
may be potential safety hazards.
· It is recommended to charge with ambient temperature below 40°C. The battery will slightly heat up when fully charged, which is normal.
· Please slide the Power On/Off switch on the right side of the remote control to "OFF" if you do not plan to use the remote control for a long
time.
FAQs
).
) on the remote control screen will continue to be displayed when the remote
).