Connecting Headphones; Connecting Headphones To Two Bluetooth; Devices - Silvercrest 288642 Bedienungsanleitung Und Sicherheitshinweise

Connecting headphones

Proceed as follows to connect the headphones to your device:
 Switch off the headphones.
 Press the ▸ll button (2) for approximately 6 seconds to start pairing mode.
 The LED (8) alternates between flashing blue and orange. The headphones
are now in search mode. In search mode, you can connect a compatible
device to the headphones via the Bluetooth
 Then connect your smartphone or audio / media player to the headphones
®
via Bluetooth
smartphone or media player. Select the device "SBTH 4.1 A1" from the list of
devices which are found and establish the connection. If you are asked for a
PIN, enter "0000".
When there is an established connection, the LED (8) flashes blue once briefly
about every 4 seconds. As soon as your music player is switched off or is out
of range, the headphones switch to standby mode (not connected) and the LED
(8) rapidly flashes blue.
If you want to connect another device to the headphones, you must repeat the
pairing as described previously.
As soon as the previously connected device comes within range of the
headphones, the connection is established automatically. You may need to
confirm the connection on your device.

Connecting headphones to two Bluetooth

You can connect the headphones to two Bluetooth
you have already connected a device to the headphones, proceed as follows
to connect another device:

Switch off the headphones and deactivate the Bluetooth
first device.
. For further details, please read the instructions of your
SilverCrest SBTH 4.1 A1
®
function.
®
devices at the same time. If
®
®

devices

function of the
English - 13