Maintenance And Service; After-Sales Service And Application Service - Bosch GTA 2600 Professional Originalbetriebsanleitung

OBJ_BUCH-843-004.book Page 14 Thursday, January 12, 2017 11:27 AM
14 | English
Extending the Saw Stand (see figures F1 – F2)
Long workpieces must be underlaid or supported at their free
end.
Place your long workpiece onto the saw table of the power
tool.
Loosen locking knob 3 and pull the table extension 2 out to
the desired clearance.
Retighten the locking knobs again.
Loosen locking knob 7 and adjust the height of the workpiece
support 1 so that the workpiece rests level.
Retighten the locking knobs again.
Sawing Workpieces of the Same Length
(see figure G)
The material stop 5 can be used for easily sawing workpieces
to the same length.
Loosen locking knob 4 and position the length stop 5 to the
desired clearance to the saw blade of the power tool.
Retighten the locking knobs again.
Adjusting the Attachment-set Bracket
(see figure H)
After intensive use of the saw stand, the bracket that locks the
attachment set 6 to the saw table via the the locking knob 8
may possibly require readjustment.
Remove the power tool from the attachment sets.
Turn the attachment set upside down.
When the attachment set cannot be locked to the saw stand
despite firmly tightening the locking knob, screw the adjust-
ment screw 21 in clockwise direction.
When the attachment set does not fit onto both rails (front
and rear) of the saw stand at the same time, screw the adjust-
ment screw 21 in anticlockwise direction.
Check the firm and correct seating of the attachment set and
repeat the adjustment, if required.
Repeat the worksteps with the second attachment set.

Maintenance and Service

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
1 609 92A 2MA | (12.1.17)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Power Tools