Fitting And Adjusting The Carrying System - Stihl BGA 100 Gebrauchsanleitung

7 Adjusting Blower for User
1
2
2
2
The connecting cable can be secured in position by the
guide (1) on the harness and the fasteners (2), or on the side
of the backplate with the fasteners (2).
3
The length of the connecting cable can be adjusted by
making a loop on the backplate (3) or at one side (4).
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7.1.2

Fitting and Adjusting the Carrying System

► Put the battery on your back.
0458-711-9621-A
2
2
2
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
4
► Tighten the straps until the waist belt fits snugly on your
► Thread the end of the waist belt through the loop (3).
► Fit the hip pad as described in the instructions supplied
3
hips and the back padding is against your back.
with the hip pad.
English
1
31