Changing Settings - Geberit Monolith Plus Bedienungsanleitung

Changing settings

1
Press and hold the <Odour
extraction unit> button for approx.
three seconds.
Result
Both indicator lights flash three
times. You are now in Settings mode.
2
Change the setting (see step 3) or
press the <Odour extraction unit>
button repeatedly until you reach the
desired menu.
Result
The selected menu is indicated by
the colour of the odour extraction
unit indicator light.
3
Press the <Large flush volume>
button repeatedly to change the
setting.
Result
The selected setting is indicated by
the colour of the orientation light.
B1111-003 © 07-2014
966.319.00.0 (02)
4
Press the <Small flush volume>
button to save the setting you have
made.
Both indicator lights flash briefly to
confirm. if the settings are not saved
or if no changes are made within
three minutes, the unit automatically
exits Settings mode without
changing the existing settings.
5
Press and hold the <Odour
extraction unit> button for approx.
three seconds to exit Settings mode.
Result
Both indicator lights flash three times. The
sanitary module is once more ready for
operation.
EN
13