Playing Music Via Usb; Description Of The Control Buttons - AEG SR 4371 BT Bedienungsanleitung

manual of your player. The device "AEG SR 4371" will
show in your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not appear in the BT selection menu.
• To disconnect an existing Bluetooth connection,
keep the / button (9) pressed down. The PAIR
control lamp flashes blue.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
After successful pairing, the device will beep two times and
the PAIR control lamp lights up blue. For the further proce-
dure, please refer to the user manual of the playback unit. If
possible, adjust the volume of the external unit to a comfort-
able level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.

Playing music via USB (1)

This device has been developed in line with the latest tech-
nical advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device. Only
use commercially available USB sticks.
1. Press the FUNCTION button (11) repeatedly until "USB"
is shown on the display.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
• Please note: The USB port is only intended for playing
music from USB sticks. It only provides a low power
(100 mA) power supply. This USB port is not suitable
for using external 2.5" hard drives with start-up currents
of up to 1100 mA. In order to play music from your
smartphone, iPod or iPhone, connect the designated
AUX IN socket.
ACAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.

Description of the control buttons

NOTE:
Not all the functions may be supported depending on the
playback device.
/ (9)
You can briefly interrupt and resume playback using this
button. The notification on the display flashes. Pressing again
continues playback.
/ (8)
During music playback:
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The button can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc. If the button
is kept pressed down, the machine starts to
search through the tracks.
(12)
The playback is stopped.
MEM/PROG/P-MODE (19)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
English
49