Technical Specifications - Beko WMB 91442 LA Handbuch

Place a large container in front of the filter to catch
water from the filter. Loosen pump filter (anticlockwise)
until water starts to flow. Fill the flowing water into the
container you have placed in front of the filter. Always
keep a piece of cloth handy to absorb any spilled
water. When the water inside the machine is finished,
take out the filter completely by turning it. Clean any
residues inside the filter as well as fibers, if any, around
the pump impeller region. Install the filter.

6 Technical specifications

Models
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Electrical input (V/Hz)
Total current (A)
Total power (W)
Spin speed (rpm max.)
Stand-by mode power (W)
Off-mode power (W)
Technical specifications may be changed without prior notice to improve the quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory
C
conditions in accordance with the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
This appliance's packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance also
contains a great amount of recyclable material. It is marked with this label to indicate the
used appliances that should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used appliance collection points closest to your home.
We thank you doing your part to protect the environment.
If your product has a water jet feature, be sure
A
to fit the filter into its housing in the pump. Never
force the filter while installing it into its housing.
Seat the filter into its place completely. Otherwise,
water may leak from the filter cap.
If the filter cap is composed of two pieces, close the
filter cap by pressing on the tab. If it is one piece, seat
the tabs in the lower part into their places first, and
then press the upper part to close.
WMB 91442 LA
9
84
60
59
75
230 V / 50Hz
10
2200
1400
1.40
0.20
67
EN