Intended Use - Hurricane HHSI 6055 Gebrauchsanweisung

ful handling reduces the risk of injury through
the cutting blades.
Keep the cable away from the cutting area.
-
When working with the trimmer the cable
might be hidden in bushes and accidentally
cut through.
Safety instructions for hedge trimmers:
Keep all parts of your body away from the
-
cutting blades. Do not try to remove cut-off
matter with the tool running. Do not try to
hold material to be cut off with your hand.
Remove cut-off matter that is stuck be-
tween the blades only with the tool being
switched off! When working with hedge trim-
mers even a short moment of inattentiveness
may result in severe injury.
Hold the power tool by its insulated han-
-
dling surfaces as the cutting blades might
get in touch with the tool's own power
cable. If the cutting blades should acciden-
tally cut into a live power cable this might turn
metal parts of the tool 'hot' thereby causing an
electric shock.
Carry the hedge trimmer at the handle with
-
the cutting blades standing still. Always
put on the protection cover when trans-
porting or storing the hedge trimmer. Care-
ful handling reduces the risk of injury through
the cutting blades.
Keep the cable away from the cutting area.
-
When working with the trimmer the cable
might be hidden in bushes and accidentally
cut through.
- The hedge trimmer should always be held
with both hands.
- Before using the equipment clear the work-
ing area of any foreign objects and be
aware of foreign objects during operation
of the machine!
- Do not use the trimmer in wet weather and
do not use it to cut wet hedges.Do not
wash down the device with water. Do not
use any high-pressure cleaning devices or
steam jet devices for cleaning.
- In line with agricultural Trade Association
Regulations only persons over the age
of 17 may work on their own with electric
hedge trimmers. Use is permitted for per-
sons over 16 years if the work is carried out
under the supervision of adults.
- Equipment which will be used in different
outside locations should be connected via
GB | Operating Instructions
- For initial use of the hedge trimmer we would
- Always ensure that all protective devices
- Never try to use an incomplete tool or a
- Familiarize yourself with the working area
- Avoid to use the hedge-trimmer in poor

Intended use

This hedge trimmer is only intended to be used to trim
shrubs, bushes, ornamental plants and hedges. It is de-
signed to cut branches with a diameter of no more than
20 mm (HHSI 6055 Hurricane). The hedge trimmer is
not intended for commercial use. The user of the hedge
trimmer must make sure that the protective equipment
specified in the operating instructions and by the warning
label on the trimmer is attached whenever the trimmer is
in use. The hedge trimmer must be checked for electri-
cal or mechanical damage before it is used or while it is
being used.
Stop working and contact a specialist workshop if you find
any damage.
Improper use
Any use not identified in the chapter „Intended use" is an
improper use.
The user of the hedge trimmer is solely liable for any
property damage or personal injury arising from improper
use of the hedge trimmer.
The manufacturer's obligation to honour the warranty is
voided if the hedge trimmer is used with non-original parts
Residual dangers
Residual risks always remain even if the hedge trimmer is
used properly. The hedge trimmer's design can entail the
following hazards:
• Contact can be made with the unprotected blade (re-
• Reaching into or grabbing the hedge trimmer while it is
• Unanticipated, sudden movement of the plant material
• Ejection or catapulting of damaged cutting teeth
• Ejection or catapulting of the plant material being cut
• Hearing damage if the specified hearing protection is
GB-4
residual current - operated current breakers.
recommend that in addition to reading the
operating instructions, you also seek a prac-
tical demonstration from an expert.
and handles are properly fitted. Never at-
tempt to use an incomplete machine.
tool that has been modified in a way that
has not been approved.
and pay attention to possible dangers
which you might not be able to hear due to
the noise of the machine.
weather conditions, especially if there is a
risk of a thunderstorm.
sulting in cutting injuries)
in operation (resulting in cutting injuries)
being cut (resulting in cutting injuries)