Esscom TWINTALKER 9200 Bedienungsanleitung Seite 10

Esscom Twintalker 9200
13.9 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended If you plan to use your radio in a noisy or windy environment.
13.10 Channel Scan
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
When an active signal (one of 8 channels) is detected, press
channel and continue to search for another active channel
13.11 Call Tones
A call tone alerts others that you want to talk.
a. Setting the Call Tone
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
13.12 Roger Beep On/Off
After the -button is released, the unit will send out a roger beep to confirm that you have
PTT
stopped talking.
10
• Press 3 times.
• Press to turn the VOX feature ON and press
VOX sensitivity level which is indicated in the right corner of the
display. Press
• In the VOX mode, the VOX icon will be displayed.
• To confirm your selection and return to the NORMAL mode, press
• Press and hold
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL
SCAN pauses and you will hear the active signal.
• Press to communicate through the active signal channel. Press
PTT
to deactivate channel scan.
5 different Call Tones can be selected.
• Press 4 times. CA will be displayed.
• Press or to select another call tone or select OF to enable call
tones.
• Press to confirm your selection and return to the standby mode.
PTT
To set the Roger Beep.
• Press 5 times. 'ro' will be displayed.
• Press to enable (ON) or
• Press to confirm your selection and return to the standby mode.
PTT
until OF appears on the display, to turn VOX OFF.
. Press briefly to start scanning.
disable the Roger-Beep (OF).
again to select the
or to bypass the current
Esscom Twintalker 9200
.
PTT