Setting The Channel - Auriol Z31130 Bedienungsanleitung

If you want your weather station to announce the absolute air pressure, proceed
like this:
Press an hold the HISTORY ABS / REL button for approx. 3 seconds. Afterwards
press the + or – -button, to change to the absolute air pressure. Confirm by
pressing the HISTORY ABS / REL button.

Setting the channel

The weather station receives the outdoor sensor signal automatically after you have
made all the settings. The symbol for humidity (outdoor)
ture flashes during this time.
25
Note: If you use more than one outdoor sensor (max. 3), you can receive data at
the weather station from all the individual outdoor sensors. Select a different channel
for each outdoor sensor by pressing the channel button
in the LC display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
32 GB/IE
85059_aur_DCF-Wetterstation_Content_LB3.indd 32
and outdoor tempera-
22
. The relevant data is shown
37
02.01.13 07:28