Setup & Operating Functions; Making The Device Ready For Operation; Setting Time, Date And Average - HMM Diagnostics Smart LAB pressure Bedienungsanleitung

III. Setup & operating functions

Making the device ready for operation

• Please open the cover of the battery case on the bottom side of the device.
• Please insert the „AAA" batteries according to the required
• Then close the cover of the battery case.
When the display shows the symbol
all.
Please do not use rechargeable batteries for this device.
When you do not use the device for one month or more please remove the batteries
in order to prevent them from discharging automatically.
Measurement device, batteries and arm cuff have to be disposed of according to
the local regulation.

Setting time, date and average

1. When the monitor is off, please press "
Note:
• During the process of setting, you can press "
time.
• If there is no operation during the process of setting, it will turn off within 1
minute.
44
for low batteries, please change them
" to enter the year settings
" button to stop setting at any
polarity.