Programming The Guest Mode; Taking Weight Measurement Only; Switching The Weight Mode - Tanita InnerScan V BC-545N Bedienungsanleitung

PROGRAMMING THE GUEST MODE

Guest mode allows you to programme the unit for a one-time use without resetting a
Personal data number.
Press the ON/OFF key while the Hand-electrodes is mounted on the platform scale.
"0.0" will be shown.
Hold the Hand-electrodes and the USER button until "Guest" appears.
Press the SET button and input your personal information such as Age, Sex, Height. Please see page 4
for more details.
After "0.0" will be shown, step on the scale holding the Hand-electrodes.
Do not step off until the unit beeps twice.
The readings will be shown for 40 seconds.

TAKING WEIGHT MEASUREMENT ONLY

Press the ON/OFF key while the Hand-electrodes is mounted on the platform scale.
After 2 or 3 seconds, "0.0" will appear in the display and the unit will beep. When
"0.0" appears in the display, step onto the platform. The Body weight value will
appear. The power will then shut down automatically.
Note: For use only with models containing the

SWITCHING THE WEIGHT MODE

weight mode switch.
You can switch the unit indication by using the switch on the back of the scale (kg/lb/st lb).
kg
lb
st lb
9