Connection Diagram - Pkm BIC7 2KB GK IX-2 H Bedienungsanleitung

2.4.1 Connection diagram

Voltage heating elements 230V.
Any kind of connection: the
safety wire must be connected to
the PE terminal.
 For 230 V earthed one-
phase connection.
 Bridges connect 1 - 2 - 3
1
terminals and 4 - 5 terminals.
 Protective ground to
 For 400 / 230 V earthed
two-phase connection.
 Bridges connect 2 - 3
2
terminals and 4 - 5 terminals.
 Protective ground to
 For 400 / 230 V earthed
three-phase connection.
 Bridges connect 4 - 5
terminals,
3
succession 1, 2 and 3,
Neutral to 4 - 5.
 Protective ground to
L1=R, L2=S, L3=T
1. Check that the technical data of your energy supply meet the values on the
nameplate.
2. Your domestic circuit must be equipped with an automatic circuit breaker.
3. Do not attempt to repair the appliance yourself. Repairs carried out by
unauthorized persons can cause serious damage. Always contact the nearest
service centre. Original spare parts should be used only..
phases in
N= Earth PE= earth wire terminal
49
Recommended
type of
connection
lead.
H05VV-F3G4
H05VV-F4G2,5
H05VV-F5G1,5