Charging Function - Hama Opal Bedienungsanleitung

• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
Warning
• Only connect the product to a socket that has been approved for the device. The socket
must be installed close to the product and easily accessible.
• Do not continue to operate the device if it becomes visibly damaged.
4. Startup and Operation
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the power output of the charger
can supply sufficient power for the device.
• Please refer to the instructions in the operating manual of your terminal device.
Note – 100-240 V mains voltage
• The charger is suitable for a mains voltage of 100-240 V and can be used around the
world. Please note that a country-specific adapter may be necessary.
• You can find an appropriate selection of Hama products at www.hama.com.
• Plug the charger into an approved and easily accessible electrical socket.
• When the power supply is active, the function LED (2) lights up in green. The charger is
now ready for use.

4.1 Charging function

• Connect the terminal device to be charged to the USB port (5) directly or using a suitable
USB cable.
• The function LED (2) lights up in red during charging.
• When charging is complete, the function LED (2) will turn green.
3