Atag OXC9 Serie Gebrauchsanweisung Seite 59

8
g e n e r a l
electrical connection
1
2
3
4
G B
This appliance may only be connected by
a qualified electrician. The correct voltage
for the appliance and the connection
value are shown on the rating plate at the
back of the oven.
The connection diagram is also shown on
the rating plate.
Always comply with local regulations
when connecting the appliance.
Remove the rear panel
Make the necessary connections using the
bridges on the terminal block.
Attach the power cord. Use a good quality
power cord, for example type
H 05 RR-F-1.5 mm.
Be sure to secure the power cord with the
cord grip.
Replace the rear panel.
I E
9