Cooking Time; End Of Operation; Preset Operation; Setting The Clock - Junker JH33UC.1 Serie Gebrauchsanleitung

Cooking time

Automatic switch-off after a cooking time setting has elapsed.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the clock function button repeatedly until
KJ
2.
the and symbols light up.
KJ x
Set the cooking time with the rotary selector
3.
(e.g. ‚ : „‹ hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Once the cooking time has elapsed, the appliance switches off
automatically.
Turn the operating mode and temperature selector back to
1.
the position.
Û
Press the clock function button to exit the clock function.
KJ
2.

End of operation

Automatic switch-off at a set time.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the clock function button repeatedly until the
KJ
2.
and symbols light up.
y
Set the end of operation using the rotary selector
3.
(e.g. : o'clock).
‚ƒ „‹
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
Turn the operating mode and temperature selector back to
1.
the Û position.
Press the clock function button to exit the clock function.
KJ
2.

Preset operation

The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
Set the operating mode and temperature.
1.
The appliance heats up.
Press the KJ
2.
the KJ and x
Set the cooking time with the rotary selector
3.
(e.g. : hours).
‚ „‹
The setting is applied automatically.
Press the KJ
4.
the KJ and y
Set the end of operation using the rotary selector
5.
(e.g. : o'clock).
‚ƒ „‹
The appliance switches off and waits until the appropriate
time to switch on (
switches off automatically at the time set for the end of
operation ( ‚ƒ
Turn the operating mode and temperature selector back to
6.
the position.
Û
Press the KJ
7.

Setting the clock

You can only change the clock when no other clock function is
active.
Press the
KJ
1.
the and
KJ 3
Set the clock using the rotary selector.
2.
The setting is applied automatically.
KJ
Checking, correcting or deleting settings
To check your settings, press the
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
clock function button repeatedly until
symbols light up.
clock function button repeatedly until
symbols light up.
‚‚ : ‹‹ in the example). The appliance
: „‹ ).
clock function button to exit the clock function.
clock function button repeatedly until
symbols light up.
clock function button
KJ
61