Case 3 : Connecting To A Tv With An Audio/Video Cable - Good Quality - Samsung BD-D8200 Bedienungsanleitung

Case 3 : Connecting to a TV with an Audio/Video cable - Good Quality

1. Using an Audio/Video cable, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red)
terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals
of your TV.
2.
Turn on the product and TV.
3.
Press the input selector on your TV remote control until the "VIDEO" signal from the product appears
on the TV screen.
If you have set the product's remote control to operate your TV (See pages 22~23), press the TV
•
SOURCE button on the remote control and select VIDEO as the external source of the TV.
Red White Yellow
NOTE
✎
▪
Noise may be generated if the audio cable is placed too close to the power cable.
▪
If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 28~29)
▪
The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your
TV.
CAUTION
!
▪
Do not connect the product to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
Audio/Video cable

English