GEHA Office X17 CD Anleitung Seite 13

Important note:
The device will switch off automatically if the motor temperature increases too much. The
red LED 'overheat' lights up and signals that the overheat protection of the device has been
activated ­ the LcD display shows 'Please Wait'. If that is the case, the device will not react
when you press the button 'rEv' or 'fWD'. The device switches back into normaloperation
as soon as the motor has cooled sufficiently.
D. functions of the LcD Display
Display status
The device is ready for operation. The device can now be used.
The device is working.
Manual forward operation.
Manual reversed operation.
The waste paper container is full. Please empty the waste paper
The waste paper container is
missing.
The number of sheets fed in is
too high.
A paper jam is caused.
The cutting mechanism is
performing a self-cleaning
operation.
The motor is overheated.
Description
-----
The button 'FWD' is being
pressed.
The button 'REV' is being pressed.
container.
Please insert the waste paper
container.
Remove the paper!
Remove the paper!
Please wait until the display
shows 'Ready'.
Wait at least 20 minutes.
Continue operation when the
display shows 'Ready'.
13