Soundmatters foxl DASH7 Bedienungsanleitung Seite 6

Operation Mode – LED Color Blue for Bluetooth, White for Aux In (Wired)
Normal Operation . . . . . . . . . . .Blue or White On (2 sec) / O (3 sec)
Battery Charging Operation . . . . . Blue or White On (2 sec) / Red (3 sec)
Battery Charging Complete . . . . . Blue or White On (2 sec) / Green (3 sec)
Low Battery . . . . . . . . . . . . . . . . Red (2 sec) / O (3 sec)
Bluetooth Pairing Mode. . . . . . . . Blue (0.5 sec) / Amber (0.5 sec)
Phone Ringing Mode. . . . . . . . . . Blue (0.5 sec) / White (0.5 sec)
Phone Call Active Mode. . . . . . . . Blue (2 sec) / O (2 sec)
Bluetooth On, not connected . . . . Blue (1 sec) / O (1 sec)
Troubleshooting
1. Sound distortion
a. If blinking red LED, battery is low, connect to AC adapter.
b. Power o , then on.
c. Lower volume.
6
2. Not enough output with DASH volume all the way up
a. Turn up the volume on the music player.
b. Move closer to DASH or to a quieter listening area.
c. Position DASH against a wall or in a corner.
3. Unable to pair with Bluetooth
a. Con rm device is Stereo Bluetooth 2.0 A2DP compatible.
b. Con rm that your DASH isn't already connected with another product
c. If your DASH Bluetooth memory is full (it can remember 8 devices),
4. Signal loss or dropouts via Bluetooth
a. Occasional signal dropouts are normal for Bluetooth.
b. Obstructions like walls or peoples body reduce the range of Bluetooth,
ENGLISH
(i.e. if you're trying to connect to your phone, make sure a previously
connected tablet is disconnected or turned o ). Or "force pair. "
(See #3 in "Bluetooth Operation" section.)
see "Clear Bluetooth Memory. "
move closer.