Manual Totalizing - KERN GAB 6K-5P Betriebsanleitung

7.9 Manual totalizing

This function is used to add the individual weighing values to the summation memory
and to provide a printout via the installed printer, when the stability display appears
and the button is pressed.
(in order to set this function see chap. 8.2 „ACC on")
 Place material to be weighed A
Wait until stability display appears
 Press
„ACC 1" followed by the weight value will appear. The weight
value is added into the summation memory and will be
printed out when the
 Remove material to be weighed A
Further material to be weighed can only be added after the
balance has returned to zero.
 Place material to be weighed B
Wait until stability display appears
 Press
„ACC 2" followed by the weight value will appear. The weight
value is added into the summation memory and will be
printed out when the
 Remove material to be weighed B
Further material to be weighed can only be added after the
display has returned to zero.
 Add more material to be weighed as described before.
Please note that the balance must be unloaded between the
individual weighing procedures.
 You can repeat this process until the capacity of the scales
is exhausted.
28
button is pressed
button is pressed
(example)

(example)

GAB-P-BA-e-1613