Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Notice
• Open the case and remove the battery
insulative strip.
• Pairing with main panel by App before
installing.
• Fix the bracket with double-side sticky
tape or screws on wall, connect the
sensor to bracket and adjust a proper
angle. 360° solid angle adjustment is
easily available with connection of bead
and magnetic slice.
• Recommended to install at height of
1.8 - 2.5m from ground
0m 1,2m-1,5 m3m
• Indoor use only. Avoid installing
the sensors in area with strong light,
temperature changes rapidly or the air
stream flows frequently, like close to
windows, air conditioner, refrigerator,
heater, oven, and large obstacles
MOTION 2010
6m
9m
English | 23
12m
Werbung
Inhaltsverzeichnis
