Switching On And Off - ALFRA ROTABEST Midi 50/50 Bedienungsanleitung

Switching on and off.

• Check connecting line and plug on damages first!
• Push button MAGNET ON, in order to initiate the magnet and the
magnetic adhesion is guaranteed.
• When working on walls and ceilings, safe machine with safety belt (f).
• Push the button MOTOR ON to start the Motor.
• The magnet foot now reaches its maximum magnetic adhesion! In case
of a damaged magnet, the motor won´t start.
• To switch off machine proceed in reverse order : MOTOR OFF and
then MAGNET OFF!
Change of tools
How to work with annular cutters ( Weldon shank)
• Mount Tool Holder AMK 2 in arbor.
• Push ejector pin (center pin) through head of annular cutter.
• Mounting of ROTABEST Cutter according to drawing. Setscrew must
be positioned in the center of the lateral flat side of the Weldon shank.
Fix tightly.
15