The Automatic Heat Up
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the graphic), and then decrea-
ses to the necessary heat setting.
To start the Automatic Heat Up function for the
cooking zone turn the knob to the right until the
display shows
heat setting. After 2 seconds
To stop the function turn the knob to the left and
set a lower heat setting.
Switching the Power function on and off
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After that the induction cooking zone auto-
matically switches back to heat setting 9. To switch on, select heat setting with knobs, than
touch
,
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the fig-
ure). The power function increases the power to
the maximum level for one cooking zone in the
pair and automatically decreases in the second
cooking zone to a lower power level. The display
for the reduced zone alternates.
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone: touch
cooking zone comes on.
• To activate the Count Down Timer: touch
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
. Then set immediately necessary
comes on.
comes on. To switch off, change the heat setting.
11
10
9
8
7
6
5
4
3
2
1
0
again and again until the indicator of a necessary
of the timer to set the time (
Operating instructions
1
2
3
4
5
6
9
7
8
9
00
99
-