Beko WTV 7732 XWO Bedienungsanleitung Seite 35

4.10 Auxiliary function selection
Select the required auxiliary functions before starting
the program. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button when
the machine is operating. For this, the machine must be in
a step before the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn
the user.
C
Some functions cannot be selected together. For example,
Prewash and Quick Wash.
If a second auxiliary function conflicting with the first
one is selected before starting the machine, the function
selected first will be cancelled and the second auxiliary
function selection will remain active. For example, if you
want to select Quick Wash after you have selected the
Prewash, Prewash will be cancelled and Quick Wash will
remain active.
Auxiliary function that is not compatible with the program
cannot be selected. (See "Programme and consumption
table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for tulle
and curtains.
• Express Wassen (Quick Wash)
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times for lightly
soiled laundries and also the number of rinsing steps.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Extra Spoelen (Rinse Plus)
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.
Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that
small differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
35 / EN
3 55 1.10
3 55 0.80
Delayed Start
With the Delayed Start function the startup of the
programme may be delayed up to 19 hours. Delayed start
time can be increased by increments of 1 hour.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
1. Open the loading door, place the laundry and put
detergent, etc.
2. Select the washing programme, temperature, spin speed
and, if required, the auxiliary functions.
3. Set the desired time by pressing the Delayed Start button.
4. Press Start / Pause button. The delayed start time you
have set is displayed. Delayed start countdown starts. "_"
symbol next to the delayed start time moves up and down
on the display.
C
Additional laundry may be loaded during the delayed
start period.
5. At the end of the countdown, duration of the selected
programme will be displayed. "_" symbol will disappear
and the selected programme will start.
Changing the Delayed Start period
If you want to change the time during countdown:
1. Press Delayed Start button. Time will increase by 1 hour
each time you press the button.
2. If you want to decrease the delayed start time, press
Delayed Start button repeatedly until the desired delayed
start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
1. Set the Delayed Start period to zero or turn the
Programme Selection knob to any programme. Thus,
Delayed Start function will be canceled. The End/Cancel
light flashes continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
4.11 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the
programme will turn on.
Remaining Moisture
Content (%) **
≤ 1000 rpm
100 /130 45
l l
100 /130 45
l l
Remaining Moisture
Content (%) **
> 1000 rpm
40
40
Washing Machine / User's Manual