Indications
PTY-STBY
PTY standby
TA VOL
Traffic announcement
volume
P-SEARCH
Programme search
TEL
Telephone muting
AMP GAIN
Amplifier gain control
IF BAND
Intermediate frequency
band
* Depends on the amplifier gain control.
12
Selectable settings, [reference page]
Activates PTY Standby Reception with one of the PTY codes, [8].
OFF [Initial] = PTY codes, [15] = (back to the beginning)
[Initial: VOL 15]; VOL 00 — VOL 30 or 50*, [8]
ON
: Using the AF data, the unit tunes in to another
frequency broadcasting the same programme as the
original preset RDS station is if the preset station
signals are not sufficient.
OFF
: [Initial]; Cancels.
MUTING 1/MUTING 2 : Select either one which mutes the sounds
while using a cellular phone.
OFF
: [Initial]; Cancels.
You can change the maximum volume level of this unit.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 45 W to prevent them from
damaging the speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
AUTO
: [Initial]; Increase the tuner selectivity to reduce
interference noises between close stations. (Stereo
effect may be lost.)
WIDE
: Subject to the interference noises from adjacent
stations, but sound quality will not be degraded and
maintains the stereo effect.