Change of dust bag and fi lters
The size and quality of the dust bag
and fi lters affect the
machine effi ciency. Use of non original
dust bags or non original fi lters can
cause restricted air fl ow which may
lead to machine overload. Using non-
original dust bag or fi lters will void the
warranty.
2
Changing the dust bag
The dust bag indicator shows when to
change the dust bag.
Always use original dust bags.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard fl ap.
4. Remove the dust bag.
5. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
6. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
7. Close the lid.
8. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
3
Changing the prefi lter
The prefi lter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the prefi lter
with every fourth dust bag. The pre-
fi lter is located behind the dust bag.
Always use original fi lters.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard fl ap.
4. Remove the dust bag.
5. Take out the fi lter holder with
prefi lter.
6. Open the fi lter holder.
7. Take out the prefi lter.
8. Fit the new prefi lter and close the
fi lter holder. Check that the prefi lter
is correctly fi tted in the holder.
9. Put the fi lter holder on the pin and
push in place.
10. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
11. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
12. Close the lid.
13. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
Extreme
EN
DE
FR
ES
PT
IT
NL
SV
NO
DA
FI
7