SPEEDLINK TRAILBLAZER Handbuch Seite 2

Check to see if a firmware update is available for your
TRAILBLAZER Racing Wheel by visiting www.speedlink.com. For
the best performance and full compatibility, always use the latest
1. Place the racing wheel on a smooth, even surface.
2. Using the cable, connect the pedal kit to the rear connector on
3. Now use the USB cable to connect the racing wheel to any free
USB port on your PlayStation*/Xbox One* or PC (USB 2.0 or 3.0, 5V
4. PS3*: Switch the console on. The LED on the racing wheel will
glow red. Press the HOME button on the racing wheel to register
5. PS4*/Xbox One*: First make sure the gamepad is switched off,
then use the micro-USB cable to connect the PS4*/Xbox One*
gamepad to the front USB port on the racing wheel. Now switch
the console on. The LED on the racing wheel will glow red. Press
the HOME button on the racing wheel to register the TRAILBLAZER
6. PC: Download and install the TRAILBLAZER Racing Wheel driver.
For the latest driver, go to: www.speedlink.com/support.
7. PC: The HOME button lets you switch between XInput mode and
digital DirectInput mode. To switch, press and hold the button for
8. You can adjust the steering sensitivity and button maps directly
on the racing wheel. For further information about these functions,
go to the SPEEDLINK website:www.speedlink.com/support. Be
version.
the racing wheel.
DC 170mA).
the TRAILBLAZER Racing Wheel.
Racing Wheel.
3 seconds.
EN