Using Smartshare - LG PRADA Benutzerhandbuch

1. I I n Idle mode, open the
application list and select
settings > wireless & network
> wi-fi direct settings > ok >
wi-fi direct.
2. Press menu
3. Select a device and then select
Connect. When the owner of
the other device accepts the
connection, pairing is complete.
4. To deactivate the WLAN Direct
feature, select disconnect wi-fi
direct.
note:
forced G/o mode(forced
Group owner mode) – touch
44
to activate group owner mode,
which enables the legacy wi-fi
devices to connect by scanning
your phone. in this case you
must enter the password that
is set in the menu > advanced >
password.
using smartshare
SmartShare uses DLNA (Digital
Living Network Alliance)
technology to share digital content
through a wireless network.
Both devices must be DLNA
certified to support this feature.
> scan.
to turn smartshare on and allow
sharing contents
1. Touch applications tab
select smartshare.
Press the menu key and select
2.
settings.
3. Touch discoverable checkbox to
turn on.
• Touch always accept
request if you would like to
automatically accept sharing
requests from other devices.
• Touch receive files if you
would like to automatically
allow the upload of files to your
phone from other devices.
4. Under the Sharing contents
section, touch to checkmark the
types of content you would like
to share. Choose from pictures,
videos and music.
5. smartshare is now activated
and ready to share contents.
to share contents from remote
content library to other devices
Let your renderer device (e.g. TV)
play multimedia contents from your
remote content library (e.g. PC).
and