Inhaltsverzeichnis
Werbung
USER MANUAL
SLAVE MODE
Press FUNC to enter MODE OPTION
Till to SLAVE shown on LCD monitor.
Connect MASTER and SLAVE lasers with DMX cable. The SLAVE lasers are
in SLAVE MODE. Check XLR Control cable connection section for your
reference.
Press ENTER to confirm the laser to
operation.
SETTING MODE
Press FUNC to enter MODE OPTION
Till to SETTING shown on LCD monitor.
Press UP/DOWN to choose MODE. You will have COLOR, MIRROR, MUSIC
modes. Press ENTER to confirm the mode.
COLOR MODE：SINGLE COLOR – singl e white color show，DOUBLE
COLOR – RGY three color show. MULTICOLOR – full color show
MIRROR MODE ： Press UP/DOWN to chang e
scanned world mirror. UP is for Y direction mirror
setting and DOWN is for X direction mirror setting.
MUSIC MODE： To set the sensitivity of SOUND mode.
ILDA Control Mode
This unit has the ILDA DB25 port, and it can be controlled by the PC, There is
auto transform set in the inside of
preprogrammed show. when connecting by the 25 pin cable, the unit will be
control by PC, when disconnect the un it, it w ill be preprogrammed program
control。
In the theor y, as long as it is ILDA B25， It can contro l this unit, but i n the
reality, some of the sof tware can not control this unit, for the 4 pin and the 17
pin of the
output card has n ot connect. In fact this is an easy problem. As
long as you connect them. It can control this unit.
show the present mode at the ne xt
the unit to transform the ILDA
22
and
Werbung
Inhaltsverzeichnis
