Cleaning The Power Brush - Samsung SR8850 Benutzerhandbuch

Maintain tools and fi lter
CLEANING THE ROBOTIC VACUUM CLEANER

CLEANING THE POWER BRUSH

You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
●
Because the dust in the dust bin may come out,
separate the dust bin fi rst before cleaning the power
CAUTION
brush.
1. Separate the dust bin by pressing the Dust Bin Eject
(PUSH) button.
2. After checking whether there are any foreign
substances, press the hook that is fi xing the brush cover
to separate it.
3. Lift the power brush up from the main unit.
4. Remove any foreign substances such as long hairs
or strings wrapped around the power brush using a
cleaning brush or a vacuum cleaner.
5. When cleaning is complete, fi x the Power Switch side of
the power brush fi rst and then fi x the other side of the
brush in the same way.
Maintain tools and fi lter _39