Nordica ELLIPSE Anweisungen Für Die Aufstellung, Den Gebrauch Und Die Wartung Seite 23

Chimney stove ELLIPSE
• have internal section equivalent to that of the stack.
• have a useful output section twice as big as the flue internal one.
• be manufactured in such a way as to prevent the penetration of rain, snow, and any other foreign body in
the flue.
• be easily checkable, for any possible maintenance and cleaning operation.
50 cm
2 m
1
m
Instructions for installation, use and maintenance – EN –Rev.05
Picture 5
10 m
(1)
from walls, pitches and trees. Otherwise raise it of at least 1 m
over the hindrance.
The chimney cap must exceed the ridge of the roof of at least
1 m.
Picture 6
>A
H min.
(1)ridge axis
α
Picture 7
(1) In case of flues side by side, a chimney cap
must be higher than the other one of at least 50 cm
in order to avoid pressure transfers between the
flues themselves.
The chimney cap must not show hindrances within 10 m
> _ A
0,5 m
(2)roof
23