Liability And Warranty; Basic Instructions; Warning Notes - ISRI 6860 Bedienungsanleitung

Liability and warranty

Failure to follow this instruction manu-
al may result in liability, warranty and na-
tional vehicle's type approval loss. Manufacturer
assumes no liability or warranty for consequent
damages should this manual not be adhered to. Fai-
lure to comply with the instructions provided may
cause serious or fatal injury to yourself and others.
Attention to detail is imperative in order to adjust the seat
to an optimal position for your body. Make sure that all
seat functions work properly and that the seat is not de-
fective. An incorrectly set seat or a wrong seating posture
may have a negative impact on the ergonomics, driver's
body, and operating capacity of the vehicle. Improper
settings of the seat may affect the ability to properly ope-
rate the vehicle in a safe manner to prevent accidents
that may cause serious or fatal accidents.
The seat must be installed, maintained or repaired by
qualified specialists. Maintenance shall be performed by
experienced professionals only. At time of installation, the
regulations of the country of installation, the installation
instructions and operating manual terms, conditions and
instructions of the vehicle manufacturer must be followed.

Basic instructions

●
Taking proper and gentle care of your seat is impe-
rative for a long lasting lifetime.
●
For your safety, and for the safety of others, the
seat must only be adjusted while seated, when the
vehicle is fully stopped, and while the parking brake
is pulled.
●
Before you start driving, the seat must be adjusted
to an optimal position for your body and the correct
seating posture must be taken, particularly when
switching vehicles.
●
Never use a damaged or faulty seat. After an acci-
dent the seat must be replaced.
●
In case of malfunction or defective parts an autho-
rized dealership has to be visited immediately in
order to check, repair, or exchange the seat or its
parts. A shaking seat can indicate, that screws got
loose or it could be a hint for another defect.
●
The following mechanisms must lock audibly into
position; horizontal slides, backrest recline, seat
cushion length, swivel (optional) and tilt. Pull the
levers completely during the whole duration of seat
adjustment, otherwise improper use could damage
parts over time. The control levers must return to
their normal position after adjustments are made.
INSTRUCTION MANUAL ISRI 6860/875
●
Don't operate several control elements at the same
time.
●
Keep hands away from the adjustment mechanism
and suspension system. Failure to follow this may
cause injury to your hand and fingers.
●
Making changes to the seat are strictly prohibited.
Fullfilment of applicable regulations for vehicle's
safety features and type approval might expire. The
safety of driver and others are endangered.
●
Do not place anything - like for example jackets,
blankets, pillows or bags - on or over a seat, that
has the heating or ventilation feature. In this case it
is also not allowed to use protective covers.
●
The seat shall not be used as method of ascent
while entering the vehicle. Standing on the seat is
not permitted. Doing so can cause damage to the
seat and/or personal injury.
●
Do not adjust the seat to a position where it can
contact other components in the cab. Make sure
that the seat is able to oscilate freely in any direc-
tion. Otherwise damage could occur to the seat or
cabin.
●
Do not block any mechanisms with foreign objects,
like for example bags and boxes.
●
In order to prevent objects from flying and causing
bodily injuries in situations such as sudden braking,
do not place anything on the seat.
●
The seat is designed to hold a maximum driver's
weight of 150 kg, resp. 330 lbs.
15