Omnitronic PM-4010 Bedienungsanleitung Seite 22

24. CUE LEVEL-CONTROL
With the CUE LEVEL-control, you can adjust the phones volume without changing the output signal.
25. CUE SPLIT/CUE MIX-BUTTON
Cue Split-function (button pressed and illuminated): the Cue-signal (mono) is on the one side of the
headphones and the output-signal (mono) on the other side.
Cue Mix-function (button released): the adjustable mix of Cue-signal and output-signal is on both sides of the
headphones.
26. CUE MIXING-FADER
Connect your headphones to the HEADPHONES sockets. With the CUE-buttons, you can select the desired
channel.
When you set the CUE MIXING-fader to MASTER, you can cue the output signal of the mixer.
When you set the CUE MIXING-fader to to the center position, you can cue both the channel-signal you
have selected and the output-signal.
When you set the CUE MIXING-fader to to CUE, you can cue the channel-signal you have selected.
27. MASTER 1-FADER
With the MASTER 1-fader, you can adjust the MASTER 1 output level.
28. X-FADER ASSIGN-SELECTOR
With the ASSIGN-selectors, you can route the signal through the crossfader rather than directly to the mix.
You have three options:
A The channel signal is routed to the crossfaders´ left side (position A).
M The channel signal is not routed to the crossfader.
B The channel signal is routed to the crossfaders´ right side (position B).
29. CROSSFADER
Mixes the signals of one channel with another. If the crossfader is in the center-position, both channels can
be heard. With the ASSIGN-selectors, you can route the channels to the crossfader.
30. FADERSTART-BUTTON
Press this button to activate the faderstart.
22/26 10006850_V_1_0