Herunterladen Inhalt Inhalt Diese Seite drucken

Jacobsen Tri King Handbuch Seite 27

Vorschau ausblenden Andere Handbücher für Tri King:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mower _________________________
Check:
Wheel lug torque 65 - 85 ft. lb. (88 - 115 N.m)
Tire pressure should be:
Front 10 - 12 psi (0.69 - 0.83 BAR)
Rear 8 - 10 psi (0.55 - 0.69 BAR)
ROPS mounting hardware 57 ft. lbs (77 N.m)
Steering nut torque 30 - 40 ft. lb. (41 - 54 N.m)
Traction pedal stop adjustment
Traction does not creep with pedal in neutral
Parking brake adjustment
Operation of all switches
Function of lift-lower pedal
Engine _________________________
Check:
Engine oil level
Engine coolant level
Air cleaner element and connections
Belt adjustment
Cutting Units ___________________
Check:
All hardware securely fastened
Reel end play, there should be none
Front roller bearing adjustment
Rear Unit lift stop orientation, and lift adjustment
Adjust reel to bedknife,.001 to .003 in. (0.025 - 0.08
mm)
Adjust cutting height to customers' requirements
Adjust down pressure springs
Support ___________________________________________________________
If you encounter any problems while setting up this
mower,
contact
the
department.
Problem Description
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
Distributor _____________________________________________
Customer _____________________________________________
Pre-Delivery Checklist
Product No. 67069 - Tri-King
Jacobsen
Customer
Electrical System _______________
Check:
Operator backup system (Section 4.14)
Reel/3WD switch
Neutral start switch
Parking brake switch
Seat switch
Backlap switch
Panel gauges and warning lights
Mower Limit switch
For pinched or rubbing wires
Hydraulic System _______________
Check:
Hydraulic oil level
For pinched or rubbing hoses
For twisted or crimped hoses
For oil leaks
Pump drive belt adjustment
Reel motor backlap nuts are set to full forward
Miscellaneous __________________
Check for loose or missing hardware
All lubrication points
Examine paint finish; touch up where necessary
Check decals. In place and legible
Make sure Safety & Operation Manual and Parts &
Maintenance Manual are in the pouch
Jacobsen,
A Textron Company
Care
11108 Quality Drive
Charlotte, NC 28273
800-848-1636
http://www.Jacobsen.com
Inspected ______________________________
Date _________________________________

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

67069

Inhaltsverzeichnis